Brocade Communications Systems Brocade 8/12c Command Reference Manual page 114

22
bottleneckMon
To display bottleneck configuration details for the switch:
Back-end port credit recovery examples
To enable back-end port credit recovery with the link reset only option and to display the configuration:
80
Jan 13 18:54:10
Jan 13 18:54:15
Jan 13 18:54:20
Jan 13 18:54:25
Jan 13 18:54:30
switch:admin> bottleneckmon --status
Bottleneck detection - Enabled
==============================
Switch-wide sub-second latency bottleneck criterion:
====================================================
Time threshold
Severity threshold
Switch-wide alerting parameters:
=================================
Alerts
Congestion threshold for alert - 0.800
Latency threshold for alert
Averaging time for alert
Quiet time for alert
Per-port overrides for sub-second latency bottleneck criterion:
===============================================================
Slot Port TimeThresh
=========================================
0 3 0.500
0 4 0.600
0 5 0.700
Per-port overrides for alert parameters:
========================================
Slot Port Alerts? LatencyThresh CongestionThresh Time(s) QTime(s)
=================================================================
0 1 Y 0.990
0 2 Y 0.990
0 3 Y 0.990
Excluded ports:
===============
Slot Port
============
0 2
0 3
0 4
switch:admin> bottleneckmon --cfgcredittools \
-intport -recover onLrOnly
switch:admin> bottleneckmon --showcredittools
Internal port credit recovery is Enabled with LrOnly
Jan 13 18:54:15
Jan 13 18:54:20
Jan 13 18:54:25
Jan 13 18:54:30
Jan 13 18:54:35
- 0.800
- 50.000
- Yes
- 0.100
- 300 seconds
- 300 seconds
SevThresh
100.000
50.000
20.000
0.900
0.900
0.900
20.00
80.00
0.00
0.00
40.00
3000 600
4000 600
4000 600
Fabric OS Command Reference
53-1001764-01