Dell PowerConnect W-7200 Series Reference Manual page 1361

Parameter
AC
ECWmin
ECWmax
AIFSN
TXOP
ACM
Command History
This command was introduced in ArubaOS 3.1.
Command Information
Platforms
All platforms
show wlan handover-trigger-profile
show wlan handover-trigger-profile [<profile-name>]
Description
Displays the current configuration settings for a handover trigger profile.
Usage Guidelines
Issue this command without the <profile> parameter to display a handover trigger profile profile list, including
profile status and the number of references to each profile. Include a profile name to display detailed configuration
information for that profile.
For this profile to take effect, the 802.11K feature needs to be enabled.
Example
(host) #show wlan handover-trigger-profile default
Handover Trigger Profile "default"
----------------------------------
Parameter
---------
Enable Handover Trigger feature
Enabled
Threshold signal strength value at which Handover Trigger should be sent to the client
dBm
The output of this command includes the following information:
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of an Access channel queue (Best-effort, Background, Video or Voice).
The exponential (n) value of the minimum contention window size, as expressed by 2
A value of 4 computes to 2
The exponential (n) value of the maximum contention window size, as expressed by 2
A value of 4 computes to 2
Arbitrary inter-frame space number.
Transmission opportunity, in units of 32 microseconds.
If this column displays a 1, the profile has enabled mandatory admission control. If this
column displays a 0, the profile has disabled this feature.
Licensing
This show command is available in the base operating system, but
the controller must have the PEFNG license in order to configure
EDCA Parameter Profiles.
4
-1 = 15.
4
-1 = 15.
show wlan handover-trigger-profile | 1361
n
-1.
n
-1.
Command Mode
Enable and Config mode on
master or local controllers
Value
-----
25 -