Dell PowerConnect W-7200 Series Reference Manual page 1408

shutdown
shutdown all
Description
This command disables all interfaces on the controller.
Usage Guidelines
This command stops all traffic through the physical ports on the controller. The console port remains active. Use
this command only when you have physical access to the controller, so that you can continue to manage using the
console port.
To shut down an individual interface, tunnel, or VLAN, use the
To restore the ports, use the
Example
The following example shuts down all physical interfaces on the controller.
(host) (config)#shutdown all
Command History
This command was introduced in ArubaOS 1.0.
Command Information
Platforms
All platforms
1408 | shutdown
command.
no shutdown
Licensing
Base operating system
option within the
shutdown
Command Mode
Config mode on master or local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
command.
interface