Table of Contents
Advertisement
show wlan dot11k-profile
show wlan dot11k-profile [<profile>]
Description
Show a list of all 802.11k profiles, or display detailed configuration information for a specific 802.11k profile.
Syntax
Parameter
<profile>
Usage Guidelines
Issue this command without the <profile> parameter to display the 802.11k profile list, including profile status and
the number of references to each profile. Include a profile name to display detailed configuration information for that
profile.
Examples
The example below shows that the controller has two configured 802.11k profiles. The References column lists the
number of other profiles with references to the 802.11k profile, and the Profile Status column indicates whether the
profile is predefined. (User-defined profiles will not have an entry in the Profile Status column.)
(host) #show wlan dot11k-profile
802.11K Profile List
--------------------
Name
----
default
11kprofile2
Total: 2
The following example shows configuration settings defined for the profile default.
(host) #show wlan dot11k-profile default
802.11K Profile "default"
-------------------------
Parameter
---------
Advertise 802.11K Capability
Forcefully disassociate on-hook voice clients
Measurement Mode for Beacon Reports
Configure specific channel for Beacon Requests
Channel requested for Beacon Reports in 'A' band
Channel requested for Beacon Reports in 'BG' band
Time duration between consecutive Beacon Requests
Time duration between consecutive Link Measurement Requests
Time duration between consecutive Transmit Stream Measurement Requests
The output of this command includes the following data columns:
1358 | show wlan dot11k-profile
Description
Name of an 802.11k profile.
References
----------
8
1
Profile Status
--------------
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Value
-----
Disabled
Disabled
beacon-table
Disabled
36
1
60 sec
60 sec
90 sec
Advertisement
Table of Contents
