Dhcp Server Exclude Address Settings; Dhcp Server Pool Settings - D-Link DGS-3600 Series User Manual

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch

DHCP Server Exclude Address Settings

The following window will allow the user to set an IP address, or a range of IP addresses that are NOT to be included in the range
of IP addresses that the Switch will allot to clients requesting DHCP service. To view this window, click L3 features > DHCP
Server > DHCP Server Exclude Address Settings. To set an IP address or range of IP addresses, enter the Begin Address of the
range and then the End Address of the range and click Apply. Set address ranges will appear in the DHCP Exclude Address Table
in the bottom half of the window, as shown below.
Figure 8- 56. Create DHCP Excluded Address window

DHCP Server Pool Settings

The following windows will allow users to create and then set the parameters for the DHCP Pool of the switch's DHCP server.
Users must first create the pool by entering a name of up to 12 alphanumeric characters into the Pool Name field and clicking
Apply. Once created, users can modify the settings of a poll by clicking its corresponding Modify button. To view the following
window, click L3 features > DHCP Server > DHCP Server Pool Settings.
Figure 8- 57. Create DHCP Pool window
Clicking the Modify button of a corresponding DHCP Pool will lead to the following window in which users can adjust the
settings for the specific DHCP pool table.
195