New Project; Project Comments - Euphonix CS3000 Operation Manual

New Project

The Project Bar is highlighted in
blue showing that the window
is currently active
Currently selected project
Comments field for the project

Project Comments

Euphonix CS3000/2000 Operation Manual
Go to the File menu. If you are in the Drive menu at the top of the last page,
simply [Esc]ape back up to the File menu. Press [F2] (Project):
File Menu
Disk:
F1
Project Menu
New?
F1
Press [F1] to create a new project. You will be prompted to name your new
project. The project name could be the record, film or TV series, or could
represent an individual operator's user space. The project name can be up to
eight characters in length. Upon naming the project, the current date and time
is automatically assigned to the project. Notice that the title list is empty since
you have not yet named a title. (See Naming a Title later in the section)
The window will look something like this:
You can enter a project's Comments field by pressing the [Tab] key on the
QWERTY keyboard. You can type in up to 4 lines of remarks in the Comments
field. Pressing [Tab] again gets you back to the Project list. You can return to
the Comments field at any time to update your comments.
Project Title Mix
F2 F3 F4
ReNm? Del? Copy?
F2 F3 F4
Section 2: Getting Started
Date and time project was created
2 - 9