Pass Join Event Entry; Viewing The Pass Join List; Join Template - Euphonix CS3000 Operation Manual

Pass Join Event Entry

Viewing the Pass Join
List
Pass0
F1
Clr?
F1
From pass and To pass
pass join At time

Join Template

Euphonix CS3000/2000 Operation Manual
Using the SpinKnob, position the yellow selection box to the pass you want to
begin from and then press [Enter]. While in the top level Pass Control menu
and screen, start timecode playing. Select a "TO" pass by moving the yellow
cursor. At the desired time, press the [Enter] key to make the change. The
yellow pass will be entered as a "TO" pass in the Pass Join list and change to
green indicating it is now the current pass. The previous green pass will be
entered into the Join list as the "FROM" pass. Repeat this a few times,
moving the yellow cursor and pressing [Enter].
Stop timecode and view the Pass Join menu and list. From the top-level Pass
Control menu, press [F4] (down arrows), [F4] (Util) and then [F2] (Join):
Undo? Redo?
F2 F3 F4
Pack? Edit Util
F2 F3 F4
This is the Pass Join menu. On the screen you will see the Pass Join list.
Combination Pass Join list and Pass Control half screen
List entries will have a pass "FROM", pass "TO" and an "AT" timecode value.
The first event in the list indicates a change FROM pass 8 TO pass 5 at
1:08:35.13. The second event indicates a change FROM pass 5 TO pass 12 at
1:08:55.21. Editing of this list is covered later in this section.
Section 7: Automation
View Join Group
F1 F2 F3
Join? Edit Tplt
F1 F2 F3
Trim
F4
ON
F4
7 - 29