Aux Copy; Bus Iso; Pan Bus Masters; Bus Kill - Euphonix CS3000 Operation Manual

Section 10: The Audio Cube

Aux Copy

Pan Bus Masters

i d t i d t i d t
i d t i d t i d t
i d t i d t i d t
i d t i d t i d t
i d t i d t i d t
i d t i d t i d t
i d t i d t i d t

Bus Kill

Bus Iso

10 - 16
Copy is done from the top level Cube Aux menu. Select the Cube aux send set
you wish to copy then press [F1]. Press fader attention keys to copy all aux
level and status info to subsequent faders.
The last subject of this section covers the pan bus master controls. Press the
DSC [Pan Assign] and [Bus Master] keys.
i d t
i d t
i d t
i d t
i d t
i d t
i d t
In addition to the SmartDisplay menus, you will see the red pan bus master
controls in the screen display.
As with aux bus masters, these controls are mapped to the DSC Rotary Control
Set, have a dB display and can be named.
The Bus Kill switch works as described for aux bus masters in that it mutes all
bus masters. The buses are then individually unmuted.
Bus Iso acts to isolate all pan bus masters from SnapShot recall.
Hyper-Surround Panners will need to be created before pan buses are fully
utilized. The next section is dedicated to Hyper-Surround and will lead you
through the process of building panners.
Euphonix CS3000/2000 Operation Manual