Title Utilities Menu; Title Rename, Delete And Copy - Euphonix CS3000 Operation Manual

Section 2: Getting Started
SIDE NOTE:
When a title is loaded the last
saved mix of that title is also
loaded and the console is reset
with the mix's snapshot &
automation template.

Title Utilities Menu

File Menu
Disk
F1
Title Utilities Menu
Title Rename, Delete
and Copy
2 - 14
Now select another title using the SpinKnob or the DSC [+]/[–] keys. When the
desired title is highlighted in the list, press [F2] to load it. You will be
prompted with the following menu:
The monitor screen will also show a prompt. To load the selected title, press
[F3] or the [Enter] key on the DSC Numeric keypad. Pressing [F4] or [Esc]cape
will abort the title load. Note that when you load a new title, you will lose
whatever title information is currently in the desk.
The newly selected title's 50 snapshots will now be loaded into the console's
memory, ready for instant access, together with the mix that was in memory
when the title was last saved. If the title did not have any saved mixes, an
"untitled mix" is loaded. As you load a title, the last mix is loaded together
with the last mix snapshot and template.
Loading a title usually takes less than a minute (unless there is quite a lot of
automation data) allowing you to move quickly between songs, shows or
whatever you do. Remember that you cannot load a project, as the project is
simply a directory area for storing your titles.
There are a few more file management features to explore before you move on
to the SnapShot Recall section of this manual. These features include renam-
ing and copying titles. You may need to refer back to this section of the
manual when you want to create, copy, rename or delete a project or title or
save files to a removable cartridge. Some of these file utilities are accessed
from the SmartDisplay Util menu or from the keyboard function keys.
We have already looked at the Title menu's New, Load and Save commands.
Now let's look at the Utils options. From theFile menu, press [F3] (Title) and
then [F4] (Utils):
Project Title Mix
F2 F3 F4
ReNm?
F1
Function keys [F1], [F2] and [F3] allow titles to be renamed, deleted and
copied. The interface is exactly the same as with projects. Use the Copy
command when backing up your title to the removable disk drive. After
selecting Copy, you will be prompted to select the destination disk and project
folder for the copy in exactly the same way as you had to select the disk for
copying a project.
Load Title ?
F1 F2
New? Load?
F1
Del? Copy? Setup
F2 F3 F4
Euphonix CS3000/2000 Operation Manual
Yes [No]
F3 F4
Save? Utils
F2 F3 F4
Title Menu