Dell Networking 7048 Reference Manual page 78

Table 1-1. System Command Groups
Command Group
Administrative Profiles
Address Table
Auto-VoIP
CDP Interoperability
DHCP L2 Relay
DHCP Management
Interface
Dynamic ARP Inspection
Ethernet Configuration
Ethernet CFM
IGMP Snooping
IGMP Snooping Querier
IP Addressing
IPv6 ACL
IPv6 MLD Snooping
IPv6 MLD Snooping
Querier
iSCSI Optimization
Link Dependency
LLDP
Port Channel
Port Monitor
QoS
(continued)
Description
Configures and displays ACL information.
Configures bridging address tables.
Configures Auto VoIP for IP phones on a switch.
Configures Cisco
®
Enables the Layer 2 DHCP Relay agent for an interface.
Configures DHCP snooping and whether an interface is
trusted for filtering.
Configures for rejection of invalid and malicious ARP
packets.
Configures all port configuration options for example
ports, storm control, port speed and auto-negotiation.
Configures and displays GVRP configuration and
information.
Configures IGMP snooping and displays IGMP
configuration and IGMP information.
Configures IGMP Snooping Querier and displays IGMP
Snooping Querier information.
Configures and manages IP addresses on the switch.
Configures and displays ACL information for IPv6.
Configures IPv6 MLD Snooping.
Configures IPv6 Snooping Querier and displays IPv6
Snooping Querier information.
Configures special QoS treatment for traffic between
iSCSI initiators and target systems.
Configures and displays link dependency information.
Configures and displays LLDP information.
Configures and displays Port channel information.
Monitors activity on specific target ports.
Configures and displays QoS information.
Discovery Protocol (CDP).
Command Groups
78