Dell Networking 7048 Reference Manual page 93

Command
shutdown
speed
storm-control broadcast
storm-control multicast
storm-control unicast
switchport protected
switchport protected name
show switchport protected
a. For the meaning of each Mode abbreviation, see
Ethernet CFM
Command
ethernet cfm domain
service
ethernet cfm cc level
ethernet cfm mep level
ethernet cfm mep enable
ethernet cfm mep active
ethernet cfm mep archive-
hold-time
ethernet cfm mip level
Description
Disables interfaces.
Configures the speed of a given Ethernet
interface when not using auto-negotiation.
Enables Broadcast storm control.
Enables the switch to count Multicast packets
together with Broadcast packets.
Enables Unicast storm control.
Sets the port to Protected mode.
Configures a name for a protected group.
Displays protected group/port information.
Mode Types
Description
Enters into maintenance domain config mode
for an existing domain. Use the optional level
parameter to create a domain and enter into
maintenance domain config mode.
Associates a VLAN with a maintenance domain. MDC
Initiates sending continuity checks (CCMs) at
the specified interval and level on a VLAN
monitored by an existing domain.
Creates a Maintenance End Point (MEP) on an
interface at the specified level and direction.
Enables a MEP at the specified level and
direction.
Activates a MEP at the specified level and
direction.
Maintains internal information on a missing
MEP.
Creates a Maintenance Intermediate Point
(MIP) at the specified level.
on page 81.
Command Groups
a
Mode
IC
IC
IC
IC
IC
IC
GC
PE
a
Mode
GC
GC
IC
IC
IC
IC
IC
93