3. Creating an HDLM Environment
• When an IA32 host is used:
# rm /boot/initrd-hdlm-2.6.18-194.el5.gz
• When an IPF host is used:
# rm /boot/efi/efi/redhat/initrd-hdlm-2.6.18-194.el5.gz
19. Stop HDLM that was used in a location other than the root directory.
For details on how to stop HDLM, see steps 2 to 4 in 3.23.1 Operations on
HDLM-Managed Devices and (1) Uninstalling HDLM.
20. Make sure that no HDLM devices are being used.
Execute the following command and make sure that
sddlmfdrv
# /sbin/lsmod
Module
:
:
sddlmfdrv
If a value other than
3.23.1 Operations on HDLM-Managed Devices, and then perform steps 2 and 3
in (1) Uninstalling HDLM so that the HDLM devices can no longer be used.
21. Uninstall HDLM.
To uninstall HDLM, execute the following command:
# rpm -e HDLM
22. Make sure that the uninstallation has been completed.
You must execute the following command to make sure that the uninstallation has
been completed. The following information is output.
# rpm -qi HDLM
package HDLM is not installed
3.23.12 Uninstalling Hitachi Network Objectplaza Trace Library
(HNTRLib2)
When you uninstall HDLM, if the
follow the directions below to uninstall HNTRLib2.
326
:
Size
254092
is displayed for
0
KAPL09019-E
is displayed for
0
Used by
0
, perform the operation described in
Used
or
KAPL09020-E
for
Used
message is output,