Hitachi XP P9500 User Manual page 585

The path corresponding to the disk aa...aa and partition bb...bb could not be
registered in the core logic.
aa...aa: Disk sequence number (decimal number)
bb...bb: Partition number (decimal number)
cc...cc: Error code (hexadecimal number)
dd...dd: Filter driver management table address (hexadecimal number)
Action
Check whether the HDLM driver has started normally. If it has not started or
contains an error, contact your HDLM vendor or the maintenance company, if
there is a maintenance contract for HDLM, and report the error and detail code.
KAPL05014-I
The device object (aa...aa) was registered as the path (bb...bb).
Details
The HDLM filter driver was successfully attached and registered as a path.
aa...aa: Address of table for managing the HDLM filter driver (hexadecimal
number)
bb...bb: Path ID (hexadecimal number)
Action
None.
KAPL05018-W
The FO processing in the path (aa...aa) failed. (bb...bb:cc...cc) Check
the connection status of the path aa...aa. If there is no problem
with the connection status, execute the DLMgetras utility to
collect error information, and then contact your vendor or
maintenance company. Refer to the HDLM User's Guide for
instructions how to execute the DLMgetras utility.
Details
An attempt at FO processing for path aa...aa has failed.
aa...aa: Core logic path identifier for the failed FO (hexadecimal number)
bb...bb: Error code (hexadecimal number)
cc...cc: 0 (fixed)
Action
The I/O being processed is discarded. Check the status of the device path and
resolve the problem accordingly. If there is no problem with the connection status
8. Messages
561