Types Of Collected Logs - Hitachi XP P9500 User Manual

Hitachi dynamic link manager software user's guide for linux (6.x) (hit5203-96004, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

2.11.1 Types of Collected Logs

HDLM collects information on the detected error and trace information in the
process-specific-trace information file, trace file, error logs, log for the dlmcfgmgr
utility for managing the HDLM configuration and syslog. You can use the error
information to examine the status of an error and analyze the cause of the error.
Table 2-8: Types of Error Information describes the types of error information.
Table 2-8: Types of Error Information
Log
name
Process-sp
Operation logs for the HDLM command are collected.
ecific-trac
e
informatio
n file
Trace file
Trace information on the HDLM manager is collected at the
level specified by the user. If an error occurs, you might need
to change the settings to collect trace information.
Error log
Error information is collected for the user-defined level. By
default, HDLM collects all error information.
HDLM-co
Logs are collected when the
nfiguratio
n
definition
utility
(
dlmcfgm
) log
gr
Syslog
The HDLM messages on or above the level set by the user
with syslogd settings file are collected.
We recommend that you configure the system so that
information at the Information level and higher is output.
Syslogs can be checked using a text editor.
Description
utility is executed.
dlmcfgmgr
#
2. HDLM Functions
Output destination
The default file path is
/var/opt/
DynamicLinkManager/log/
.
dlnkmgr[1-2].log
The following is the trace file
name:
/var/opt/
DynamicLinkManager/log/
hdlmtr[1-64].log
HDLM Manager logs:
/var/opt/
DynamicLinkManager/log/
dlmmgr[1-16].log
Hitachi Command Suite Common
Agent Component logs:
/var/opt/
DynamicLinkManager/log/
N
dlmwebagent[1-
].log
The value N depends on the setting
in the file
dlmwebagent.properties
The following is the log file name.
/var/opt/
DynamicLinkManager/log/
dlmcfgmgr[1-2].log
/var/opt/
DynamicLinkManager/log/
dlminquiry.log
The default file path is
/var/log/
messages.
The syslog file path is specified in
the syslogd settings file. For
details, see the Linux
documentation.
.
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynamic link manager

Table of Contents