Hitachi XP P9500 User Manual page 635

Managing the HDLM Configuration.
KAPL10302-I
/sbin/dlmcfgmgr completed normally.
Details
The HDLM-configuration definition utility (
successfully.
Action
None. For details on the
Managing the HDLM Configuration.
KAPL10305-E
A special file could not be created. Filename = aa...aa. Execute
the DLMgetras utility to collect error information, and then
contact your vendor or maintenance company.
Details
A logical device file for an HDLM device cannot be created.
aa...aa: Logical device file name of HDLM device
Action
Execute the
contact your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM. For details on the
Utility for Collecting HDLM Error Information.
KAPL10306-W
The configuration definition file is invalid. Refer to the
Messages section of the HDLM User's Guide for instructions to
correct this problem.
Details
The configuration definition file (
.dlmfdrv.conf
Action
/etc/opt/DynamicLinkManager/.dlmfdrv.conf
restart the host. The logical device file name of the HDLM device might be
changed, so that after the host restarts, check the logical device file name. If the
logical device file name was changed, modify the path to the upper-level program.
KAPL10308-W
The configuration definition file could not be created. Execute
the DLMgetras utility to collect error information, and then
contact your vendor or maintenance company.
dlmcfgmgr
utility for collecting HDLM error information, and then
DLMgetras
/etc/opt/DynamicLinkManager/
) is invalid.
) has completed
dlmcfgmgr
utility, see 7.3 dlmcfgmgr Utility for
utility, see 7.2 DLMgetras
DLMgetras
to an alias name and
8. Messages
611