# /opt/DynamicLinkManager/bin/dlnkmgr set -lic
KAPL01049-I Would you like to execute the operation? Operation
name = set [y/n]: y
KAPL01071-I A permanent license was installed.
#
4.3.10 Viewing HDLM Version Information
This section explains how to display HDLM version information.
To display HDLM version information, execute the
operation with the
executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys
HDLM Version
Service Pack Version
Load Balance
Support Cluster
Elog Level
Elog File Size (KB)
Number Of Elog Files
Trace Level
Trace File Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Reservation Status
Intermittent Error Monitor
HDLM Manager Ver
Alive
HDLM Alert Driver Ver
Alive
HDLM Driver Ver
Alive
LicenseType Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
The value displayed in
parameter specified. The following is an example of
-sys
WakeupTime
x.x.x-xx
yyyy/mm/dd hh:mm:ss
WakeupTime
x.x.x-xx
WakeupTime
x.x.x-xx
yyyy/mm/dd hh:mm:ss
-
HDLM version
command's
dlnkmgr
x.x.x-xx
:
:
: on(extended lio)
:
: 3
: 1000
: 2
: 0
: 1000
: 4
: on(30)
: on(1)
:
: off
yyyy/mm/dd hh:mm:ss 1000
indicates the HDLM version.
4. HDLM Operation
view
ElogMem Size
349