8. Messages
Wait until the executing utility finishes, and then re-execute
If two or more utilities are not executing simultaneously, delete the following
files, and then re-execute the utility:
/etc/opt/DynamicLinkManager/.dlm_modules.conf.lock
KAPL12553-W
Usage: /opt/DynamicLinkManager/bin/dlmsetopt {-r retrycount |
-inqt InquiryTimeout | -inqr InquiryRetry | -h}
Action
Refer to 7.6 dlmsetopt Utility for Setting HDLM Driver Options, and then
specifying the correct argument. Then, re-execute the
KAPL12554-I
The utility for setting HDLM driver option has started.
Action
None.
KAPL12555-I
The utility for setting HDLM driver option completed normally.
Action
None.
KAPL12556-I
An attempt to execute the utility for setting HDLM driver option
has failed.
Action
Check the action recommended in the error message output before this message,
and take action accordingly.
KAPL12557-I
The user stopped the utility for setting HDLM driver option.
Details
Even if the message KAPL12555-I is output before this message, the contents set
by the execution of the
return to the state before the execution.
Action
If necessary, re-execute the
KAPL12558-I
Please restart the computer so that the option settings take
effect.
656
utility will have no effect and the settings will
dlmsetopt
utility.
dlmsetopt
.
dlmsetopt
utility.
dlmsetopt