Hitachi XP P9500 User Manual page 208

3. Creating an HDLM Environment
12. Change the name of the configuration contained in the boot loader configuration
file.
Change the name of the configuration that you copied in step 11. You can assign
any name that indicates that the configuration is used for specifying the SCSI
device.
• When GRUB is used as the boot loader:
Change the underlined text as follows:
Before:
title Red Hat Enterprise Linux (2.6.18-194.el5)
After:
title sd-Red Hat Enterprise Linux (2.6.18-194.el5)
• When LILO or ELILO is used as the boot loader:
Change the underlined text as follows:
Before:
label=linux
After:
label=linux-sd
13. Change the specification for
from
LABEL
correspondence checked in step 5.
Change the specification for
in step 11.
If any options have been specified to suit the user environment, take care not to
delete those options.
• When GRUB is used as the boot loader:
Change the
• When LILO or ELILO is used as the boot loader:
Change the specification for
been specified to suit the user environment, delete or comment out the
append
14. In the boot loader configuration file, edit the settings to be used during a boot.
• When GRUB is the boot loader
184
option
append=" root=LABEL=/
contained in the boot loader configuration file
root
to the SCSI device, based on the
contained in the configuration that you copied
root
specification on the
root
root
line.
option
"
and SCSI device
LABEL
line to
kernel root=
to SCSI-device. If no options have
root=
SCSI-device.