Hitachi XP P9500 User Manual page 440

6. Command Reference
exrr
lio
exlio
lbk
exlbk
The type of algorithm specified by the
stored in the system, even when you disable the load
balancing function by specifying -lb off
re-enable the load balancing function without specifying an algorithm, load
balancing will be performed according to the algorithm that is stored in the
system.
error-log-collection-level
-ellv
Specify the level of error information you want to collect for an error log.
The HDLM manager log (
error log collection level can be set.
Table 6-3: Values of the Error Log Collection Levels shows the values of the
error log collection level. If an error occurs, you may have to set the error log
collection level to 1 or higher to collect log information.
Table 6-3: Values of the Error Log Collection Levels
Value
Collects no error log.
0
Collects error information for the Error or higher level.
1
Collects error information for the Warning or higher level.
2
Collects error information for the Information or higher level.
3
Collects error information for the Information (including maintenance information) or higher
4
level.
The higher the error log collection level value, the more log information will be
output. As the amount of log information that is output increases, the amount of
time before existing information will be overwritten becomes shorter.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr set -ellv 1
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01001-I The HDLM command completed normally.
416
: The Extended Round Robin algorithm
: The Least I/Os algorithm
: The Extended Least I/Os algorithm
: The Least Blocks algorithm
: The Extended Least Blocks algorithm
dlmmgr[1-16].log
-lbtype parameter remains
) contains log files in which an
Description
. Therefore, if you