Autopath_Id - Hitachi XP P9500 User Manual

parameter and the LU information and displayed items.
To display LU information
-lu
When neither the
-c
the information about the LU recognized by HDLM is displayed without selecting
items to be displayed or displaying a summary. The sorting key is iLU and its
configuration information is displayed for each LU.
By using the sub-parameter,
information to be displayed. If you do not specify
information about all LUs recognized by HDLM is displayed. For details on the
content of each displayed item, see Table 6-17: LU Information. The
sub-parameters are:
host-device-name
-hdev
Displays information only for the paths accessing the specified host device.
Specify the name of the logical device file (minus the partition number),
[aa-pap], for the HDLM device. For details on logical device
dev/sddlm
files for HDLM devices, see 2.6 Logical Device Files for HDLM Devices.
The host-device-name string is case-sensitive.

AutoPATH_ID

-pathid
Use this parameter to display only the information about the LU that is
connected to the path with that specified AutoPATH_ID.
-t
Omits the title for each information item.
Example
The following example shows how to display the LU information without
selecting items to be displayed:
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
Product
SerialNumber
LUs
iLU HDevName Device
0000 sddlmac
0001 sddlmad
nor parameter is specified with the
-item
or
-hdev -pathid
: 9500V
: 0115
: 5
PathID Status
/dev/sds 000002 Online
/dev/sdd 000007 Online
/dev/sdi 000012 Online
/dev/sdn 000017 Online
/dev/sdt 000003 Online
/dev/sde 000008 Online
6. Command Reference
parameter,
-lu
, you can filter the LU
or , the
-hdev -pathid
/
451