Hitachi XP P9500 User Manual page 174

3. Creating an HDLM Environment
For details on operating environments for the virtual environments supported by
HDLM, see 3.1.13 Virtual Environments Supported by HDLM. For details on
how to set up a virtual environment, see 3.11 Settings for Xen or 3.12 Settings
for KVM.
19. Specify the settings required for operations in a cluster configuration.
For a cluster configuration, change the logical device file names of SCSI devices
specified in the cluster to logical device file names of HDLM devices.
For details on setting the cluster software, see 3.13 Settings for Heartbeat,
3.14 Settings for Oracle RAC, 3.15 Settings for the RHCM, or 3.16 Settings for
VCS.
20. Execute the
and status of each program.
The following is an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys
HDLM Version
Service Pack Version
Load Balance
Support Cluster
Elog Level
Elog File Size (KB)
Number Of Elog Files
Trace Level
Trace File Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Reservation Status
Intermittent Error Monitor : off
HDLM Manager
Alive
HDLM Alert Driver Ver
Alive
HDLM Driver
Alive
License Type
Permanent
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time =
#
Even when cluster software is being used,
the cluster function is operating normally.
150
command's
dlnkmgr view
Ver
x.x.x-xx
x.x.x-xx
Ver
x.x.x-xx
Expiration
-
operation to check the HDLM settings
x.x.x-xx
:
:
: on(extended lio)
:
: 3
: 9900
: 2
: 0
: 1000
: 4
: on(30)
: on(1)
:
WakeupTime
yyyy/mm/dd hh:mm:ss
WakeupTime
yyyy/mm/dd hh:mm:ss
WakeupTime
yyyy/mm/dd hh:mm:ss
yyyy/mm/dd
Support Cluster
ElogMem Size
1000
is blank. However,