Hitachi XP P9500 User Manual page 652

8. Messages
aa...aa: HDLM device name
bb...bb: SCSI device name
cc...cc: Host ID (decimal number)
Channel: Channel ID (fixed value:
dd...dd: Target ID (decimal number)
ee...ee: LUN (decimal number)
Action
None. For details on the
Managing the HDLM Configuration.
KAPL10361-I
HDLM has deactivated a path for the HDLM device. HDLM device =
aa...aa, Device = bb...bb (Host: cc...cc Channel: 0 ID: dd...dd Lun: ee...ee)
Details
By executing the HDLM-configuration definition utility (
to the HDLM device has been made inactive.
aa...aa: HDLM device name
bb...bb: SCSI device name
cc...cc: Host ID (decimal number)
Channel: Channel ID (fixed value:
dd...dd: Target ID (decimal number)
ee...ee: LUN (decimal number)
Action
None. For details on the
Managing the HDLM Configuration.
KAPL10362-W
HDLM has detected an active path that cannot be deleted. HDLM
device = aa...aa, Device = bb...bb (Host: cc...cc Channel: 0 ID: dd...dd
Lun: ee...ee). Refer to the Messages section of the HDLM User's
Guide for instructions to correct this problem.
Details
An attempt to execute the HDLM-configuration definition utility (
failed because a path to the specified HDLM device was being used.
aa...aa: HDLM device name
628
) (decimal number)
0
utility, see 7.3 dlmcfgmgr Utility for
dlmcfgmgr
) (decimal number)
0
utility, see 7.3 dlmcfgmgr Utility for
dlmcfgmgr
), the path
dlmcfgmgr
)
dlmcfgmgr