3. Creating an HDLM Environment
procedure differs depending on whether the host is restarted after installation.
21. Execute the
correspondence between the HDLM device and the SCSI device.
# dlmcfgmgr -v
HDevName
/dev/sddlmaa configured /dev/sda
KAPL10302-I /sbin/dlmcfgmgr completed normally.
The
HDevName
indicates the SCSI device.
22. Edit the
/etc/lvm/lvm.conf
device, not the SCSI device.
Figure 3-19: Example of Editing /etc/lvm/lvm.conf file shows examples of
editing the
Figure 3-19: Example of Editing /etc/lvm/lvm.conf file
Comment out the existing
the figure.
Set 0 in
md_component_detection
Record the original
218
utility with the
dlmcfgmgr
Management Device
column indicates the HDLM device, and the
file so that the LVM2 recognizes the HDLM
/etc/lvm/lvm.conf
filter
md_component_detection
parameter specified to check the
-v
Host
Channel Target Lun
0
file.
and
lines, and add the shaded lines in
types
.
value, because it is necessary
0
0
0
column
Device