Hitachi XP P9500 User Manual page 597

ee...ee: Target ID (same as PathName of
ff...ff: HLU number (same as PathName of
gg...gg: Dev number (same as DNum of
number)
hh...hh: Host device name (same as HDevName of
Action
There could be an error in the path. See 5.3 What To Do for a Path Error and
restore the path displayed in the message to running status.
KAPL08023-I
A path was recovered. PathID = aa...aa, PathName =
bb...bb.cc...cc.dd...dd.ee...ee, DNum = ff...ff, HDevName = gg...gg
Details
aa...aa: Path ID (same as PathID of
bb...bb: Host port number (same as PathName of
number)
cc...cc: Bus number (same as PathName of
dd...dd: Target ID (same as PathName of
ee...ee: HLU number (same as PathName of
ff...ff: Device number (same as DNum of
number)
gg...gg: Host Dev name (same as HDevName of
Action
None.
KAPL08026-E
An error occurred on all the paths of the LU. PathID = aa...aa
Details
An error occurred in the last, remaining path of an LU. (This is most likely as a
result of a disconnection.)
aa...aa: Path ID (same as PathID of
Action
Errors are detected in all the paths connected to the LUs. See 5.3 What To Do for
a Path Error to make the path shown in the error message or the paths connected
to the target LU.
) (hexadecimal number)
view -path
) (hexadecimal number)
view -path
) (decimal (base-10)
view -path
view -path
) (decimal (base-10) number)
view -path
view -path
) (hexadecimal number)
view -path
) (hexadecimal number)
view -path
) (hexadecimal number)
view -path
) (decimal (base-10)
view -path
view -path
) (decimal (base-10) number)
view -path
8. Messages
)
) (hexadecimal
)
573