B. Troubleshooting Products That Use The Weak-Modules Script; B.1 Installing Products That Use The Weak-Modules Script - Hitachi XP P9500 User Manual

B. Troubleshooting Products That Use the Weak-Modules Script

If you use an HDLM device as a boot disk in Red Hat Enterprise Linux 5 and attempt
to install or uninstall a product that uses the weak-modules script, the following
message might be output, and installation or uninstallation of that product might fail:
grubby fatal error: unable to find a suitable template
Therefore, when using an HDLM device as a book disk in Red Hat Enterprise Linux
5, execute the following commands before installing or uninstalling a product that uses
the weak-modules script:
Before installation
# rpm -qp
weak-modules
Before uninstallation
# rpm -q
weak-modules
#
If you do not know the package file name of the product that uses the
weak-modules script, perform the procedures described in B.1 Installing
Products That Use the Weak-Modules Script or B.2 Uninstalling Products That
Use the Weak-Modules Script.
If no message is output after executing the above
use the weak-modules script. You can install or uninstall the product as usual.
If a message is output, the product uses the weak-modules script. Perform the
procedures described in B.1 Installing Products That Use the Weak-Modules Script or
B.2 Uninstalling Products That Use the Weak-Modules Script.

B.1 Installing Products That Use the Weak-Modules Script

To install a product that uses the weak-modules script:
1. Determine which device specified in the
directory (
In each of the following examples, the underlined part indicates the device for the
B. Troubleshooting Products That Use the Weak-Modules Script
package-file-name-of-product
package-file-name-of-product
).
/
#
--scripts | grep
#
--scripts | grep
command, the product does not
rpm
file is indicated as the root
/etc/fstab
697