Hitachi XP P9500 User Manual page 677

Hitachi dynamic link manager software user's guide for linux (6.x) (hit5203-96004, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

KAPL12333-E
An HBA that HDLM can support as a boot disk was not found in the
file. File name = aa...aa
Details
aa...aa: The name of the file referenced by the
supporting the boot disk
Action
Make sure that an HBA driver that can be used when the boot disk is an HDLM
device is in the following file:
• When Red Hat Enterprise Linux AS4/ES4 or Red Hat Enterprise Linux 5 is
used:
/etc/modprobe.conf
• When Red Hat Enterprise Linux 6 is used:
/etc/modprobe.d/dlmdrvopt.conf
• When SUSE LINUX Enterprise Server 10 or SUSE LINUX Enterprise
Server 11 is used:
The line of
Also, make sure that the HBA driver has been installed.
KAPL12334-E
Multiple root partition entries exist in the file. File name =
aa...aa
Details
aa...aa: The name of the file referenced by the
supporting the boot disk
Action
Modify the
utility (
dlmmkinitrd
root partition setting in the
KAPL12335-E
A file system that HDLM can support as a boot disk was not found
in the file. File name = aa...aa
Details
aa...aa: The name of the file referenced by the
supporting the boot disk
Action
INITRD_MODULES=
file specified in the
fstab
), and then retry the operation. Alternatively, modify the
/etc/fstab
dlmmkinitrd
of a
/etc/sysconfig/kernel
dlmmkinitrd
parameter of the boot disk support
fstab
file and then retry the operation.
dlmmkinitrd
8. Messages
utility for
file
utility for
utility for
653

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynamic link manager

Table of Contents