Hitachi XP P9500 User Manual page 683

Hitachi dynamic link manager software user's guide for linux (6.x) (hit5203-96004, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

dlmdrvopt.conf
• When the file contents match:
Delete the
modprobe.conf
that an error does not occur.
• When the file contents do not match:
Overwrite the
DynamicLinkManager/DLMSETOPT/modprobe.conf
re-configure the content that was configured in the
file according to the user's environment. Then, delete the
DynamicLinkManager/DLMSETOPT/modprobe.conf
re-execute the
KAPL12567-E
The version of the kernel supported by the installed HDLM does
not match the currently running kernel version.
Details
The version of the kernel to which installed HDLM has adjusted and the kernel
that is running now is not corresponding. There is a possibility of installing the
package of the kernel after installing HDLM.
Action
Install HDLM that adjusts to the kernel that is running now.
KAPL12568-E
The HDLM file is invalid. File name = aa...aa
Details
A file necessary for processing HDLM cannot be found. Alternatively, the content
of a file is invalid.
aa...aa: Name of file where error was detected.
Action
Reinstall an HDLM.
KAPL12801-E
The version of the kernel supported by the installed HDLM does
not match the currently running kernel version.
Details
The version of the kernel to which installed HDLM has adjusted and the kernel
that is running now is not corresponding. There is a possibility of installing the
package of the kernel after installing HDLM.
.
/etc/opt/DynamicLinkManager/DLMSETOPT/
file. Then, re-execute the
/etc/modprobe.conf
utility to make sure that an error does not occur.
dlmsetopt
utility to make sure
dlmsetopt
file with the
/etc/opt/
file, and then
/etc/modprobe.conf
/etc/opt/
file. Finally,
8. Messages
659

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynamic link manager

Table of Contents