Hitachi XP P9500 User Manual page 660

8. Messages
same as, the maximum number. Refer to the Messages section of
the HDLM User's Guide for instructions to correct this problem.
Details
The number of paths in the entire system exceeded the maximum number of paths
supported in HDLM. Review and, if necessary, revise the configuration.
Action
The maximum number of paths supported in HDLM has been exceeded. Review
and, if necessary, revise the number of paths in the entire system. For details on
the number of paths supported in HDLM, see 3.1.12 Number of Paths Supported
in HDLM.
KAPL10938-I
dlmcfgmgr Log File Size(KB) : aa...aa
Details
aa...aa: The setup value or default value of dlmcfgmgr Log File Size.
Action
None.
KAPL10939-W
An error occurred during processing to read a file. File name =
aa...aa
Details
An error occurred during processing to read a file.
aa...aa: File name
Action
Follow the instructions in the message that was output before this message.
KAPL10940-W
The maximum wait time has been reached. Maximum wait time =
aa...aa, Checking interval = bb...bb
Details
The maximum wait time has been reached.
aa...aa: Maximum wait time
bb...bb: Checking interval
Action
Confirm that the configuration for HDLM devices is correct.
636