Hitachi XP P9500 User Manual page 211

Change the underlined text as follows:
Before:
label=linux-sd
After:
label=linux-HDLM
25. Delete the specification contained in the boot loader configuration file.
root
Delete the specification in the configuration that you copied in step 23. If
root
you are using a Xen kernel, delete the root device specification in
details on Xen kernels, see Table 3-47: Xen Hypervisor Operating Environments
Supported by HDLM.
26. Specify the initial RAM disk image file created in step 19 for
in the boot loader configuration file.
Change the
initrd
If you are using a Xen kernel, change the
to the initial RAM disk image file you created in step 19. For details on Xen
kernels, see Table 3-47: Xen Hypervisor Operating Environments Supported by
HDLM.
Keep in mind that the specification method for
boot loader.
If any options have been specified to suit the user environment, take care not to
delete those options.
27. If SUSE LINUX Enterprise Server 10 or SUSE LINUX Enterprise Server 11 is
used, delete the
resume
Delete the
resume
step 23. If
resume
because it is not supported by HDLM.
28. In the boot loader configuration file, edit the settings to be used during a boot.
• When GRUB is the boot loader
Change the
default
configuration copied in step 23.
default=3
• When LILO or ELILO is used as the boot loader:
Specify
label
default linux-HDLM
specification in the configuration that you copied in step 23.
initrd
setting contained in the boot loader configuration file.
specification contained in the configuration that you copied in
is set for the parameter, delete the
kernel
number so that a boot can be performed using the
for .
default
3. Creating an HDLM Environment
module
initrd
file name specified in
differs depending on the
initrd
resume
. For
contained
module
setting,
187