Hitachi XP P9500 User Manual page 723

For device, enter the device you determined in step 1.
In each of the following examples, the underlined part indicates the kernel
parameter added in this step:
Example when the boot loader is elilo and LVM is not used:
image=vmlinuz-2.6.18-92.el5
label=linux-HDLM
initrd=initrd-2.6.18-92.el5.img.hdlm
read-only
append="console=ttyS0,19200 rhgb quiet root=/dev/
sddlmaa2"
Example when the boot loader is grub and LVM is used:
title Red Hat Enterprise Linux Server
(2.6.18-92.el5-HDLM)
root (hd0,0)
kernel /vmlinuz-2.6.18-92.el5 ro rhgb quiet root=/
dev/VolGroup00/LogVol00
initrd /initrd-2.6.18-92.el5.img.hdlm
3. Install other products that use the weak-modules script.
Perform installation according to the documentation for relevant products
(packages).
4. Back up the currently used initial RAM disk image file for HDLM.
5. Execute the
dlmmkinitrd
parameter specified to create an initial RAM disk image file for HDLM.
For the parameter, specify the initial RAM disk image file name that is currently
B. Troubleshooting Products That Use the Weak-Modules Script
:
:
:
:
:
:
:
:
utility (utility for supporting a boot disk) with the
-f
699