Hitachi XP P9500 User Manual page 237

3. Creating an HDLM Environment
Figure 3-15: Example of Editing /etc/lvm/lvm.conf file
Comment out the existing and lines, and add the shaded lines in
filter types
the figure.
In addition, set to its original value before
md_component_detection
installation.
8. Edit the boot loader configuration file so that the OS will start with a SCSI device
specified.
Edit the boot loader configuration file as shown in Figure 3-16: Example of
Editing /etc/grub.conf file, Figure 3-17: Example of Editing /boot/grub/menu.lst
file (When using a kernel that supports Xen), and Figure 3-18: Example of
Editing /etc/elilo.conf file.
If you are using SUSE LINUX Enterprise Server 10 or SUSE LINUX Enterprise
Server 11, check the file instead of the
/boot/grub/menu.lst /etc/
file.
grub.conf
The detailed procedure is explained in steps 9 to 12.
Figure 3-16: Example of Editing /etc/grub.conf file, Figure 3-17: Example of
Editing /boot/grub/menu.lst file (When using a kernel that supports Xen), and
Figure 3-18: Example of Editing /etc/elilo.conf file show examples of editing the
configuration file.
213