Hitachi XP P9500 User Manual page 381

# /sbin/lsmod | grep acpiphp
acpiphp
If the module has been loaded, replace the HBAs as described in
acpiphp
(2) Procedure for replacing HBAs. If the
continue to step 2.
2. Create the
acpiphp.modules
First, execute the following command:
# vi /etc/sysconfig/modules/acpiphp.modules
Next, edit the
acpiphp.modules
#/bin/bash
/sbin/modprobe acpiphp
Save the changes to the file, and then use the
permissions as follows:
# chmod 755 /etc/sysconfig/modules/acpiphp.modules
Finally, after the
chmod
permissions have been set as indicated by the underlined portion below.
# ls -l /etc/sysconfig/modules/acpiphp.modules
-rwxr-xr-x 1 root root 35
modules/acpiphp.modules
3. Load the
acpiphp
Execute the
acpiphp.modules
58713 0
acpiphp
file.
file as follows:
command has been executed, confirm that the execution
mm dd hh
module.
file you created in step 2.
4. HDLM Operation
module has not been loaded,
OS command to set execution
chmod
mm
: /etc/sysconfig/
357