Hitachi XP P9500 User Manual page 441

Operation name = set, completion time = yyyy/mm/dd
hh:mm:ss
#
error-log-file-size
-elfs
Specify a value from 100 to 2,000,000 (in KB) for the size of the error log files
( n
dlmmgr .log
is applied to HDLM manager logs.
By specifying both the error log file size and the number of error log files, you
can collect up to 32,000,000 KB (approximately 30 GB) of error logs in total.
When the size of all the log files in a log file group reaches their maximum value,
the new log data will overwrite the existing log data, starting with the oldest log
data.
number-of-error-log-files
-elfn
Specify the number of error log files (
from to )). Specify a value from
1 16
By specifying both the error log file size and the number of error log files, you
can collect up to 32,000,000 KB (approximately 30 GB) of error logs in total.
trace-level
-systflv
Specify the trace output level.
Log files for which the trace level can be set are
from 1 to 64).
Table 6-4: Trace Level Values shows the values of the trace level. When an error
occurs, we recommend that you set the value of the trace level to
re-collect log information.
Table 6-4: Trace Level Values
Value
Does not output any trace.
0
Only outputs error information.
1
Outputs a summary of program operation.
2
Outputs details of program operation.
3
Outputs all information.
4
The higher the error log collection level value, the more log information will be
output. As the amount of log information that is output increases, the amount of
(n indicates a file number from
dlmmgr
to
2
Description
6. Command Reference
to )). The specified files size
1 16
n (n indicates a file number
.log
.
16
n (where n is a value
hdlmtr .log
or higher and
1
417