Hitachi XP P9500 User Manual page 638

8. Messages
Details
Since the parameter of the HDLM-configuration definition utility (
was inaccurate, execution of the
dlmcfgmgr
Configuration.
Action
Specify the correct options, and then re-execute the
KAPL10320-E
The file format is invalid. File name = aa...aa. Refer to the
Messages section of the HDLM User's Guide for instructions to
correct this problem.
Details
The file format is invalid.
aa...aa: file name
Action
Re-execute the HDLM-configuration definition utility (
message is output, execute the
information, and then contact your HDLM vendor or maintenance company if
you have a maintenance contract for HDLM.
For details on the
HDLM Error Information. For details on the
7.3 dlmcfgmgr Utility for Managing the HDLM Configuration.
KAPL10321-W
The specified HDLM device is invalid. Device = aa...aa. Specify a
valid logical device file name of an HDLM device, and then
execute the dlmcfgmgr utility.
Details
Executing the HDLM-configuration definition utility (
because the logical device file name of the HDLM device was incorrect.
aa...aa: Logical device file name of HDLM device
Action
Specify a correct logical device file name of an HDLM device, and then
re-execute the
7.3 dlmcfgmgr Utility for Managing the HDLM Configuration.
614
| -u {special-file-name ... | all}
|-logfs [log-file-size]}
dlmcfgmgr
utility, see 7.3 dlmcfgmgr Utility for Managing the HDLM
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting
DLMgetras
utility. For details on the
dlmcfgmgr
utility failed. For details on the
utility.
dlmcfgmgr
dlmcfgmgr
utility for collecting HDLM error
utility, see
dlmcfgmgr
) failed
dlmcfgmgr
utility, see
dlmcfgmgr
)
dlmcfgmgr
). If the same