Hitachi XP P9500 User Manual page 602

Hitachi dynamic link manager software user's guide for linux (6.x) (hit5203-96004, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

8. Messages
KAPL09035-E
The HDLM driver could not be loaded. Execute the dlmstart
utility. For details on the dlmstart utility, refer to the HDLM
User's Guide section "dlmstart (Utility for Starting HDLM)".
Details
The HDLM driver could not be loaded.
Action
Execute the
7.7 dlmstart Utility for Starting HDLM.
KAPL09036-E
The HDLM manager could not be started. Execute the /etc/init.d/
DLMManager command with the start parameter to start the HDLM
manager.
Details
The HDLM manager could not be started.
Action
Execute the
start the HDLM manager.
KAPL09037-E
The status of the HDLM manager could not be checked. If the HDLM
manager does not start, execute the /etc/init.d/DLMManager
command with the start parameter to start the HDLM manager.
Details
An attempt to acquire the status of the HDLM manager has failed.
Action
If the HDLM manager does not start, execute the
command with the start parameter to start the HDLM manager.
KAPL09038-E
The HDLM configuration could not be deleted.
Details
Deleting the HDLM configuration failed because a managed HDLM device was
being used.
Action
Stop applications that are using the managed HDLM device, unmount the
managed HDLM device, and then retry uninstallation.
578
utility. For details on the
dlmstart
/etc/init.d/DLMManager
utility, refer to
dlmstart
command with the start parameter to
/etc/init.d/DLMManager

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynamic link manager

Table of Contents