Hitachi XP P9500 User Manual page 699

/opt/DynamicLinkManager/bin/dlmmgr
have executable permissions. Reinstall an HDLM.
KAPL13909-W
Usage: /opt/DynamicLinkManager/bin/dlmstart
Action
Re-execute the utility for HDLM start if necessary. Refer to 7.7 dlmstart Utility
for Starting HDLM.
KAPL13910-W
The error occurred while processing the utility for HDLM start.
Action
Resolve the problem according to the message KAPL13908-W, which was output
before this message.
KAPL13911-E
The utility for HDLM start ended abnormally. Error Code = aa...aa
Details
aa...aa: Error number that identifies the executed processing (decimal number)
Action
When the error code is
When
delete it manually and then retry the execution.
When the error code is
/sbin/dlmcfgmgr
permissions. Reinstall an HDLM.
When the error code is
/etc/init.d/DLMManager
permissions. Reinstall an HDLM.
KAPL13912-E
An invalid parameter was specified. Parameter = aa...aa
Details
aa...aa: Specified parameter
Action
Re-execute the utility for HDLM start if necessary. Refer to 7.7 dlmstart Utility
for Starting HDLM.
:
1
/dev/dlm/sddlmadrv0
:
2
file does not exist or does not have executable
:
3
file does not exist or does not
file or a file other than character device file,
file does not exist or does not have executable
8. Messages
675