Uninstalling Hitachi Network Objectplaza Trace Library (Hntrlib2) - Hitachi XP P9500 User Manual

# hagrp -modify service-group PreOnline 0
# haconf -dump -makero
22 Execute the following command:
.
# installp -u DLManager.mpio
23 Change the boot device list, according to the host environment you are
.
using.
If you are not using a virtual I/O server, uninstallation of HDLM is
complete and you do not need to perform the remaining steps.
24 If you are using a virtual I/O server, define an hdisk as a virtual target
.
device.
On the virtual I/O server, execute one of the following commands:
¢
¢
25 Execute the following command in the client logical partition to
.
reconfigure the device:
# cfgmgr
26 Execute the following command in the client logical partition to check that
.
the physical volume has been recognized as hdisk:
# lsdev -Cc disk
Make sure that the following execution result is displayed:
hdisk1 Available
27 Execute the following command to restore the backed up volume group:
.
# restvg -f any-desired-file-name-or-device-name hdisk-name

Uninstalling Hitachi Network Objectplaza Trace Library (HNTRLib2)

When you uninstall HDLM, if the KAPL09019-E or KAPL09020-E message is
output, follow the directions below to uninstall HNTRLib2.
To uninstall HNTRLib2:
1 Log in to AIX as the root user.
.
2 Execute the following command to unregister the name of the bundled
.
program products.
# /opt/hitachi/HNTRLib2/etc/hntr2cancel "Hitachi Dynamic Link
Manager"
3 Execute the following command.
.
3-98
To create an hdisk as a virtual target device
$ mkvdev -vdev hdisk-name -vadapter virtual-SCSI-server-
adapter-name
To create a logical volume as a virtual target device
$ mkvdev -vdev logical-volume-name -vadapter virtual-SCSI-
server-adapter-name
Virtual SCSI Disk Drive
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))