Hitachi XP P9500 User Manual page 341

pci-0000:20:01.0-scsi-0:0
:1:0-part2 disk/by-uuid/
c230c70d-1b18-4d95-b50a-31edb3bd038c
In the execution result,
scsi-2000c50fffecb6ae0-part2
name) that corresponds to
To specify the device name (
instead of the SCSI device, replace the SCSI device (
in step 3 with
If LVM2 is not used, go to step 7.
6. When LVM2 is used, edit the
recognizes the SCSI device, not the HDLM device.
Figure 3-43: Example of Editing /etc/lvm/lvm.conf file show examples of editing
the
/etc/lvm/lvm.conf
Figure 3-43: Example of Editing /etc/lvm/lvm.conf file
Comment out the existing
the figure.
In addition, set
md_component_detection
disk/by-id/
/dev/sda2
name) in the
udev
/dev/disk/by-id/scsi-2000c50fffecb6ae0-part2
/etc/lvm/lvm.conf
file.
and
filter types
3. Creating an HDLM Environment
indicates the device name (
.
directory
/dev/disk
/dev/sda2
file so that the LVM2
lines, and add the shaded lines in
to its original value before
udev
) checked
.
317