Hitachi XP P9500 User Manual page 302

3. Creating an HDLM Environment
message will be displayed to confirm the execution, and the trace file will be
temporarily deleted.
By specifying both the trace file size and the number of trace files, you can collect up
to 1024000 KB of trace data.
The following is an example of using a command to set the number of trace files:
# /opt/DynamicLinkManager/bin/dlnkmgr set -systfn 10
Specify the number of trace files by using numbers.
(11) Setting Up Audit Log Data Collection
If you want to collect audit log data, you must also specify the collection level for audit
log data and the audit log categories.
Table 3-60: Values Indicating Audit Log Data Collection Levels describes the values
that indicate audit log data collection levels. An audit log data collection level is a
severity level. The default is
Table 3-60: Values Indicating Audit Log Data Collection Levels
Value (severity)
0
1
2
3
4
5
6
7
Table 3-61: Values Indicating Audit Log Data Categories describes the values that
indicate audit log data categories. The default is
Table 3-61: Values Indicating Audit Log Data Categories
Value
Audit log events of the
ss
Audit log events of the
a
278
.
6
No audit log data is collected.
Critical-level audit log data is collected.
Critical-level and Error-level audit log data is collected.
Critical-level, Error-level, and Warning-level audit log data is collected.
Critical-level, Error-level, Warning-level, and Informational-level audit log data is
collected.
category are collected.
StartStop
Authentication
Explanation
.
all
Explanation
category are collected.