Hitachi XP P9500 User Manual page 658

8. Messages
For details on the
the HDLM Configuration.
KAPL10922-E
The version of the kernel supported by the installed HDLM does
not match the currently running kernel version. Install the HDLM
software that supports this kernel version.
Details
The version of the kernel to which installed HDLM has adjusted and the kernel
that is running now is not corresponding. There is a possibility of installing the
package of the kernel after installing HDLM.
Action
Install HDLM that adjusts to the kernel that is running now.
KAPL10923-E
The HDLM file is invalid. File name = aa...aa. Reinstall the HDLM
software.
Details
A file necessary for processing HDLM cannot be found. Alternatively, the content
of a file is invalid.
aa...aa: Name of file where error was detected.
Action
Reinstall an HDLM.
KAPL10934-W
A file could not be opened. File name = /etc/opt/
DynamicLinkManager/hdlm_utillog.conf, Errno = aa...aa. Refer to
the Messages section of the HDLM User's Guide for instructions
to correct this problem.
Details
An attempt to open the settings file for the HDLM utility log (
DynamicLinkManager/hdlm_utillog.conf
size of 1024 KB will be assumed, and the processing of the
will continue.
aa...aa: Error number (decimal number)
Action
Make sure that the file exist. If the file is normal, execute the
for collecting HDLM error information, and then contact your HDLM vendor or
the maintenance company if there is a maintenance contract for HDLM.
634
utility, see 7.3 dlmcfgmgr Utility for Managing
dlmcfgmgr
/etc/opt/
) has failed.A maximum log file
dlmcfgmgr
DLMgetras
utility
utility