Hitachi XP P9500 User Manual page 568

8. Messages
aa...aa:
clear
Action
If you did not perform HDLM configuration, Perform HDLM configuration.
When performing neither of the above, or if the same error continues to occur
even after one of the above procedures is performed, execute the utility for
collecting HDLM error information (
information, and then contact your HDLM vendor or maintenance company if
there is a maintenance contract for HDLM. For details on the
see 7.2 DLMgetras Utility for Collecting HDLM Error Information.
KAPL01113-E
The HDLM file is invalid. File name = aa...aa
Details
A file necessary for processing HDLM cannot be found. Alternatively, the content
of a file is invalid.
aa...aa: Name of file where error was detected.
Action
Reinstall an HDLM.
KAPL01114-W
The audit log configuration file does not exist. Restart the HDLM
Manager, and execute the "dlnkmgr view -sys -audlog" command and
check the setting.
Details
The audit log configuration file does not exist.
Action
Restart the HDLM Manager, and execute the
command, and then specify the desired setting by using the
-audlog
KAPL01115-W
The audit log configuration file cannot be opened. Execute the
"dlnkmgr view -sys -audlog" command and check whether a normal
result is displayed.
Details
The audit log configuration file cannot be opened.
Action
If the
dlnkmgr view -sys -audlog
544
, ,
offline online
command or the
dlnkmgr set -audfac
, , or
set view
) to collect the error
DLMgetras
dlnkmgr view -sys -audlog
command as necessary.
command does not display a normal
utility,
DLMgetras
dlnkmgr set