Device, And Ldev - Hitachi XP P9500 User Manual

4. HDLM Operation
To display LU information, execute the
parameter specified. The following is an example of executing the command:
-lu
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
Product
SerialNumber
LUs
iLU HDevName Device
0000 sddlmac
0001 sddlmad
0002 sddlmae
0003 sddlmaa
0004 sddlmab
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
For details on the displayed items and their descriptions, see 6.7 view (Displays
Information).
4.3.5 Displaying Corresponding Information About an HDLM Device,
SCSI Device, and LDEV
This subsection explains how to display corresponding information about an HDLM
device, SCSI device, and LDEV by using an HDLM command.
You can display corresponding information about an HDLM device, SCSI device, and
LDEV by executing the
parameter specified. For details on the
Information). The execution result of this operation is displayed on a single line for
each path.
344
dlnkmgr
: 9500V
: 0115
: 5
PathID Status
/dev/sds 000002 Online
/dev/sdd 000007 Online
/dev/sdi 000012 Online
/dev/sdn 000017 Online
/dev/sdt 000003 Online
/dev/sde 000008 Online
/dev/sdj 000013 Online
/dev/sdo 000018 Online
/dev/sdu 000004 Online
/dev/sdf 000009 Online
/dev/sdk 000014 Online
/dev/sdp 000019 Online
/dev/sdq 000000 Online
/dev/sdv 000005 Online
/dev/sdg 000010 Online
/dev/sdl 000015 Online
/dev/sdr 000001 Online
/dev/sdw 000006 Online
/dev/sdh 000011 Online
/dev/sdm 000016 Online
command's
dlnkmgr
view
command's operation with the
view
operation with the
view
operation, see 6.7 view (Displays
-drv