Hitachi XP P9500 User Manual page 460

6. Command Reference
Parameter and
program
information to be
displayed
-lic
Information about the
HDLM license
-audlog
Information about audit
log data collection
settings
-lbpathusetimes
The number of times
the same path can be
used for load balancing
436
Item
License type
License Type
•
Permanent
•
Temporary
•
Emergency
License expiration:
Expiration
When using a permanent license: -
When using a temporary license or emergency license: The
license expiration period is displayed in the format:
n
dd (
executed,
the license period expires.
• For example, when there are 100 days left until the license
period (2006/08/21) expires, the following appears:
2006/08/21(100days after)
Settings for audit log data collection:
Audit Log
• Whether collection is enabled
on
off
• Audit log data collection level:
When audit log data collection is on, the collection level that
has been set is displayed within the parentheses following
on
from
The categories of audit log data to be output are displayed. When
Audit Log
more than one category is displayed, commas (
Category
separators.
:
ss StartStop
:
a Authentication
:
ca ConfigurationAccess
If all the above categories are specified,
If the collection of audit log data is disabled, a hyphen (
displayed.
The name of the audit log facility is displayed.
Audit Log
Facility local1
local7
If the collection of audit log data is disabled, a hyphen (
displayed.
The number of times the same path can be used for I/O
Times Same
operations when the Round Robin (
Path Was Used
Least Blocks (
Description
. When the
days after) view -sys -lic
n appears if there are n days left until
( days after)
: Enabled
: Disabled
. The collection level indicates a severity level. A value
to is displayed as the collection value.
0 7
, , ,
local2 local3 local4
is displayed.
) algorithm is used for load balancing.
lbk
yyyy/mm/
operation is
) are used as
,
is displayed.
all
) is
-
, ,
user local0
, , , or
local5 local6
) is
-
), Least I/Os ( ), or
rr lio