4. HDLM Operation
3.
Execute the
) to place in
-hba
that you identified in step 2.
For the
-hba
separating them with a period.
The following shows an example of placing the path (host port number is
and path number is
# /opt/DynamicLinkManager/bin/dlnkmgr offline -hba 0000.0000
After you have executed the
the
dlnkmgr
all the paths passing through the HBAs being replaced are in
# /opt/DynamicLinkManager/bin/dlnkmgr view -path -hbaportwwn
4.
Replace the HBAs.
5.
Execute the
configuration.
# dlmcfgmgr -r
6.
Execute the
-hbaportwwn
360
operation of the
offline
status all paths that pass through the HBA ports
Offline(C)
parameter, specify the host port number and the bus number by
) in the
0000
Offline(C)
offline
command (
dlnkmgr view -path -hbaportwwn
utility (
dlmcfgmgr
dlmcfgmgr -r
operation of the
view
dlnkmgr
) to confirm that the new paths have been added.
command (
dlnkmgr
dlnkmgr offline
status.
operation, execute the
view
Offline(C)
) to change the HDLM device
command (
dlnkmgr view -path
0000
operation of
) to confirm that
status.