Hitachi XP P9500 User Manual page 593

Hitachi dynamic link manager software user's guide for linux (6.x) (hit5203-96004, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Information.
KAPL06014-E
Could not write emergency information into the emergency
information buffer. (aa...aa:bb...bb)
Details
Urgent information from the filter driver was destroyed without being written to
the urgent information buffer because the attempt to reserve memory for the
information failed.
aa...aa: Message code (hexadecimal number)
bb...bb: Buffer size (hexadecimal number)
Action
Check whether any other error occurred. The information that could not be
written is discarded.
Review the actual memory size if another error does not occur.
If the actual memory size is insufficient, increase it.
If the actual memory size is sufficient, execute the
collecting HDLM error information, and then contact your HDLM vendor or the
maintenance company if there is a maintenance contract for HDLM. For details
on the
DLMgetras
Information.
KAPL06100-E
The version of the kernel supported by the installed HDLM does
not match the currently booting kernel version.
Details
The version of the kernel supported by the installed HDLM is different from the
currently running kernel version.
It may be that you booted the kernel that is different from the kernel when you
installed HDLM.
Action
Install an HDLM that supports the currently running kernel.
KAPL06101-E
The HDLM file is invalid. File name = aa...aa
Details
A file necessary for processing HDLM cannot be found or the content of a file is
invalid. Therefore, the Alert driver cannot be loaded.
utility, see 7.2 DLMgetras Utility for Collecting HDLM Error
8. Messages
utility for
DLMgetras
569

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynamic link manager

Table of Contents