Hitachi XP P9500 User Manual page 615

Details
Although the aa...aa processing has ended, an error occurred during the
processing.
aa...aa:
ENVIRONMENT_SETTINGS
installhdlm
Action
Review the contents of installation information settings file when KAPL01008-W
or KAPL01009-W is outputted before this message. For details, see
7.10.3 Editing an Installation-Information Settings File.
When a message except for the above was outputted, perform the action indicated
in that error message.
KAPL09215-E
The system environment is invalid. Error Code = aa...aa
Details
The system environment is not valid as an environment for executing the
installhdlm
aa...aa: Error number (decimal number) that specifies the executed processing
Action
If the error code is 4:
The
does not have write permission for it. Make sure there is enough unused
capacity and that the user has write permission for this directory, and then try
again.
If the error code is 6:
The
does not have write permission for it. Make sure there is enough unused
capacity and that the user has write permission for this directory, and then try
again.
other error code:
Contact your HDLM vendor or the maintenance company if there is a
maintenance contract for HDLM.
KAPL09216-E
An error occurred during I/O of a file that installhdlm uses.
Error Code = aa...aa,bb...bb
Details
utility.
directory does not have enough unused capacity, or the user
/var/tmp
directory does not have enough unused capacity, or the user
/etc/opt
,
driver_config_settings
8. Messages
, or
591