Figure 3-22: Example of Editing /etc/elilo.conf file
Edit the shaded portion.
27. Copy the configuration that was used for startup from the HDLM device.
28. Assign a name to the copied configuration that indicates that the configuration is
used for specifying the HDLM device after update.
• If you will use GRUB as the boot loader
Change
title
• If you will use ELILO as the boot loader
Change
label
29. Delete the
specification.
root
If you are using a kernel that supports Xen, delete the root device specification in
.
module
.
.
3. Creating an HDLM Environment
223