4. HDLM Operation
In the above figure, new paths that have been added are indicated by shading.
Although the information about the old paths (underlined information) that were
placed in
status before the HBAs were replaced remains, this
Offline(C)
information will be deleted in step 8.
7.
Execute the
utility (
) to confirm that new SCSI
dlmcfgmgr
dlmcfgmgr -v
devices have been added.
New SCSI devices that have been added are indicated by shading in the above
figure.
Although the information about the old SCSI devices (the underlined
361