Dlmgetras Utility For Collecting Hdlm Error Information; Format; Parameters - Hitachi XP P9500 User Manual

7. Utility Reference

7.2 DLMgetras Utility for Collecting HDLM Error Information

This utility collects information that is needed to analyze HDLM errors that have
occurred, such as error logs, process-specific-trace information files, trace files,
definition files, core files, and libraries. The collected information is archived in a file
and saved to the directory that you specified. The following files are output:
•
cluster.tar.gz
This file contains compressed cluster information.
•
hbsa.tar.gz
This file contains compressed error information of the Hitachi Command Suite
products other than HDLM.
This file is output only when using a Hitachi Command Suite product that is the
target for collecting error information.
•
getras.tar.gz
This file contains compressed HDLM information and system information.
For details about the information that is stored in each file, see 7.2.3 List of Collected
Error Information.
When you want to collect information other than that in 7.2.3 List of Collected Error
Information, define the information to collect in the information- collection- definition
file. Information defined in information- collection- definition file is compressed into
getras.tar.gz.
When the host is restarted, some of the information that was collected by the
utility will be deleted. If an error occurs, immediately execute this utility.
DLMgetras

7.2.1 Format

/opt/DynamicLinkManager/bin/DLMgetras
directory-to-which-collected-information-is-output
{
file-that-defines-information-to-be-collected
[-f
You can also use lower-case characters (
follows:
/opt/DynamicLinkManager/bin/dlmgetras
directory-to-which-collected-information-is-output
{
file-that-defines-information-to-be-collected
[-f

7.2.2 Parameters

directory-to-which-collected-information-is-output
466
]|-h}
instead of
dlmgetras
]|-h}
) as
DLMgetras