Hitachi XP P9500 User Manual page 651

(decimal number)
Action
Revise the configuration of the HDLM device to reduce the number of HDLM
devices used, and then re-execute the
dlmcfgmgr
Configuration.
KAPL10358-E
The device name is too long. Maximum length = aa...aa. Check that
the logical device file name of the HDLM device is correct, and
then execute the dlmcfgmgr utility again.
Details
An attempt to execute the HDLM-configuration definition utility (
failed because the name of the logical device file is too long.
aa...aa: Maximum length of characters for a logical device file name (decimal)
Action
Check that the logical device file name of the HDLM device is correct, and then
re-execute the
7.3 dlmcfgmgr Utility for Managing the HDLM Configuration.
KAPL10359-E
Multiple instances of the HDLM-configuration definition utility
cannot be executed concurrently. Wait until the running
dlmcfgmgr utility ends, and then try the dlmcfgmgr utility
again.
Details
An attempt to execute
dlmcfgmgr
Action
Wait until the running HDLM-configuration definition utility (
and then re-execute the HDLM-configuration definition utility (
details on the
HDLM Configuration.
KAPL10360-I
HDLM has activated a path for an HDLM device. HDLM device = aa...aa,
Device = bb...bb (Host: cc...cc Channel: 0 ID: dd...dd Lun: ee...ee)
Details
By executing the HDLM-configuration definition utility (
to the HDLM device has been made active.
utility, see 7.3 dlmcfgmgr Utility for Managing the HDLM
utility. For details on the
dlmcfgmgr
failed because two or more instances of
dlmcfgmgr
were executed simultaneously.
utility, see 7.3 dlmcfgmgr Utility for Managing the
dlmcfgmgr
utility. For details on the
dlmcfgmgr
dlmcfgmgr
dlmcfgmgr
8. Messages
)
dlmcfgmgr
utility, see
) ends,
dlmcfgmgr
). For
dlmcfgmgr
), the path
627